7.3 Auto Provision tab (desk phones)

Auto provisioning sets up a supported desk phone automatically, so you do not have to configure it by hand. If the user has no phone yet the tab shows No phone with an Add new phone button.

Figure 7.7 Adding a desk phone on the Auto Provision tab

1. Click Add new phone. The SIP Phone Setup form opens.
2. Under PHONE CONFIGURATION, enter a Name for the phone (for example Desk Phone) and its MAC Address (printed on a label under the phone, in the form 00:1A:2B:3C:4D:5E).
3. Choose the Device Make (Polycom is supported) and then the Device Model (see the table below).
4. Optionally, under FUNCTION KEYS, choose a Type, enter a Value and a Label (for example Reception) and click Add for each programmable key you want.
5. Click Save. Plug the phone into the network; it downloads its settings and registers to the user's extension.

note

A manual restart is required when a desk phone is added to a user for the first time. Once provisioning is successful, you can restart the phone using the Restart Phone button under the added device.

List	Choices
Device Make	Polycom
Device Model (Polycom)	vvx101, vvx1500, vvx250, vvx300, vvx301, vvx310, vvx350, vvx400, vvx410, vvx450, vvx500, vvx600
Function key Type	Line, Speed Dial, Check Voicemail, Park and Retrieve, Hot Desk